Home - Products - ADVANCED COMPOSITES - AvaSpire? (PAEK) -AvaSpire? (PAEK)
DUPONT
BASF
SANTOPRENE
LUVOCOM
SOLVAY
DSM
LANXESS
EMS
SABIC
COVESTRO
LATI
RTP
VICTREX
QUADRANT
GEHR
ENSINGER
ROCHLING
TORAY
NFD
AvaSpire? resin is a high-performance polyketone family of PAEK (Polyaryl Ether Ketone) specifically designed to fill the price and performance gap between PEEK and other high-performance polymers. For example, compared with similar grades of PEEK, its ductility and toughness are significantly improved, the tensile yield elongation is 20% higher, and the tensile elongation at break is doubled.
AvaSpire? PAEK grade supply: basic (lubricated, non-lubricated); glass and carbon fiber reinforced (structured); wear-resistant SL (lubricated, non-lubricated, load-bearing)
| BRAND | PRODUCT DESCRIPTION AND APPLICATION | DATA SHEET | ROHS | MSDS | REACH |
| AvaSpire? AV-848 GF30 | 30% glass fiber. |
 |
|
|
|
| AvaSpire? AV-848 CF30 | 30% carbon fiber. |
|
|
|
|
| AvaSpire? AV-848 | AvaSpire? AV-848 is a high-temperature, polyaryletherketone (PAEK) that offers several key performance advantages over comparable grades of PEEK above 150°C. |
|
|
|
|
| AvaSpire? AV-755 SL45 | Very good wear resistance, lubricated, high melt flow for injection molding. |
|
|
|
|
| AvaSpire? AV-750 GF40 | 40% glass fiber, high melt flow for injection molding. |
|
|
|
|
| AvaSpire? AV-742 SL30 | Very good wear resistance, dry and lubricated, high melt flow for injection molding. |
|
|
|
|
| AvaSpire? AV-722 SL30 | Very good wear resistance, dry and lubricated, low melt flow for extrusion and injection molding. |
|
|
|
|
| AvaSpire? AV-722 CF30 | 30% carbon fiber, low melt flow for extrusion and injection molding. |
|
|
|
|
| AvaSpire? AV-722 | Low melt flow for extrusion and injection molding. |
|
|
|
|
| AvaSpire? AV-651 GF30 | 30% glass fiber, better chemical resistance than AV-621, high melt flow for injection molding. |
|
|
|
|
中文版
ENGLISH